Jim Evins
58 lines
1.2 KiB
Markdown
58 lines
1.2 KiB
Markdown
gLabels Linux Build Instructions
|
|
================================
|
|
|
|
## General
|
|
### Prerequisites
|
|
|
|
- g++
|
|
- CMake 2.8.12+
|
|
- Qt5 5.4+ Development Packages ( Qt5Core, Qt5Widgets, Qt5PrintSupport, Qt5Xml, Qt5Svg )
|
|
- zlib 1.2+ Development Package
|
|
|
|
> Even if the above library packages are installed, their corresponding development packages
|
|
> may also need to be installed. Development packages are usually named something like
|
|
> libraryName-dev or libraryName-devel.
|
|
|
|
### Compile and Install
|
|
|
|
gLabels uses the CMake meta build system. Use the following commands to build and install gLabels:
|
|
|
|
<pre>
|
|
$ cd <i>glabels_source_directory</i>
|
|
$ mkdir build
|
|
$ cd build
|
|
$ cmake ..
|
|
$ make
|
|
$ sudo make install
|
|
</pre>
|
|
|
|
## Example: Ubuntu 19.04
|
|
|
|
### Installing Prerequisites
|
|
```
|
|
sudo apt install cmake
|
|
sudo apt install qtbase5-dev libqt5svg5-dev qttools5-dev zlib1g-dev
|
|
```
|
|
_QREncode (Optional)_
|
|
```
|
|
sudo apt install pkgconf libqrencode-dev
|
|
```
|
|
_Zint (Optional)_
|
|
```
|
|
wget https://downloads.sourceforge.net/project/zint/zint/2.6.3/zint-2.6.3_final.tar.gz
|
|
tar xzf zint-2.6.3_final.tar.gz
|
|
cd zint-2.6.3.src
|
|
mkdir build && cd build && cmake .. && make
|
|
sudo make install
|
|
```
|
|
### Compile and Install gLabels
|
|
|
|
```
|
|
$ cd glabels-qt
|
|
$ mkdir build
|
|
$ cd build
|
|
$ cmake ..
|
|
$ make
|
|
$ sudo make install
|
|
```
|